| |
Product Name |
Buy Now |
 |
ACCORD & STUD BOY CARBIDE RUNNERS
We carry a full line of Accord and Stud Boy Carbide Runners for all makes, models, and can special order. The Accord carbide runner is available in one style. Stud Boy has three styles of carbide runners to choose from... |
 |
 |
HOOKER STYLE STUDS- STUDS FOR ALL HOOKER STYLE PLATES
These are a shorter version of the famous Saber Razorbacks and Saber Razors. The carbide spikes are simply a Razorback with the short (3/16" long x 1/4-20) thread needed for mounting onto the steel plates of Hooker... |
|
 |
MACRO ABP'S FOR WART HOG STUDS
Reinforced design makes this the industry's strongest aluminum angled backer plate.
Most rigid way to mount studs.
Won't rotate,
5/32" thick,
Available in 45 degree 1 and 2 hole styles.
ABP1456 is for 5/16" and... |
|
 |
ROETIN HORNETS
Hornet Studs 70 degree carbide tips with nuts. Heavy duty 5/16" shank; no rust platinum tone finish. Lengths available in stock are 1.34" and 1.43" with box of quantities 24, 96, and 144. |
|
 |
ROETIN THRUSTERS
Roetin Thrusters have maximum straight line traction for grass & snow drags. The four degree chisel angle provides optimum traction in grass or snow. The 50% smaller cross section allows easier & deeper penetration. |
|
 |
SABER STUDS - SHOVEL POINT STINGERS
Easiest chisel-style stud to install.
Most aggressive push thru stud on the market.
For dirt and ice racing!!
A round 30 degree point with a machined flat profile.
Penetrates more easily than any stud on the... |
|
 |
SQUARE DOMED BACKING PLATES FOR WART HOG STUDS
We have received many compliments over the years on our square backing plates. Second only to Saber ABP's in stud mounting effectiveness. Saber domed backers are as close to unbendable as any on the market. Use the... |
|
 |
STUD TEMPLATES
We have developed 2 stud templates. The first is a Trail template which is good for 96, 144, & 192 patterns. This will give 32 scratch lines. This pattern is designed to give up a little straight line traction and allow... |
|
 |
TOP DOG XZP CARBIDE STUDS
The king of stainless steel. 44% larger carbide inserts. More durable 68 degree point. All XZP studs have the specially designed carbide point that survived the pavement holeshot test intact. |
|
 |
TRACK CUTTER
A drill tool that cleanly cuts the perfect size hole for 1/4", 7mm or 5/16" stud. We use these in the shop 100%. Burning creates its own problems. Order DT100 for 1/4" or 7mm size hole or DT200 for 5/16" size hole.... |
|
 |
ZIP TOOLS
Finally a simple, easy way to install T-nuts into rubber tracks - the Zip Tool! Saber has made these (by hand) for years for use in the Saber stud installation shop. That's right, this is one of the tricks we use when... |
|
Home 
